Skip to main content

Upgrade Catalyst C9500

Upgrading Catalyst 9500 series switch is relatively easy. The one that I'm going to upgrade today is on Install mode containing packages.conf file. Install mode consumes far less resources in compared to the traditional bundle mode and has some advantage like auto upgrade when configured in stacked mode. We can talk about the difference between bundle and install mode later on. Let's focus on upgrading the Catalyst 9500 switch.

Switch I am trying to upgrade is in 17.03.03 which has some bugs and security vulnerabilities.

I am upgrading it from 17.03.03 to 17.6.5(MD) golden image present in the cisco download site for C9500 series switch and also reading down the linked document from cisco that is what they recommend. You can have a look at it .
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-9300-series-switches/221498-recommended-releases-for-catalyst-9200-9.html



We will first need to create FTP username and password in the switch. The username and password must be same as per created in the FTP server. 
My source IP on this case while trying to connect to FTP server is on vrf (Mgmt-vrf). So while trying to copy the image from FTP to the Flash we must also mention the vrf.






Let's now copy the file into the flash of the switch which I have already downloaded and added into our FTP server. You can see as mentioned about I have also mentioned the vrf as the source IP that connects to the FTP server 10.27.31.180 is in Mgmt-vrf.

Once the image is upload all we need to do is install the file using the below command. Switch will reboot at the end and will take around 10 minutes to boot back up.








After the reboot switch will now boot using the new stable image which is 17.06.05 in our case.







Labels:

Comments

Post a Comment

Popular posts from this blog

SSL Decryption FortiGate

  We have pretty much heard about SSL decryption and of malware hiding inside an encrypted traffic. A large amount of traffic in the internet is pretty much encrypted which basically means that bad things like malware, virus, ransomware can hide inside this encrypted traffic. If majority of these traffic are encrypted our Firewalls are not able to analyze these traffic which can easily infect our organization and the investment which we have done in these firewalls are wasted. There does come around a solution for this and as my topic suggest SSL Decryption also know as Deep Packet Inspection as by some IT folks. The image that I have attached down below clearly suggest about what I am trying to explain. Using deep packet inspection, the firewall simply decrypts the encrypted traffic happening  between client and server, inspects the content to find the threats and block them , then forwards it to the destination re-encrypting it . We will need to first setup the SSL/SSH in...
Post a Comment
Read more

SAN Switch Zoning with Brocade

Zoning in Brocade SAN Switch Let's begin with resetting the switch completely. In my environment I have two brocade SAN Switch connecting to 2 Dell R940 server configured with VMware. The SAN switch will be having connectivity between Dell Unity 500 storage and Dell R940 servers. Multipathing will be done between the server and storage with the help of SAN Switch. Multipathing, also called SAN multipathing or I/O multipathing, is the establishment of multiple physical routes between a server and the storage device that supports. It results in better fault tolerance and performance enhancement. DESIGN The idea behind zoning is that intended WWPN talk with each other . This is more like ACL in the world of Ethernet. To see the devices which are logged into the switch the following commands can be executed. SAN-A:admin> switchshow switchName: SAN-A switchType: 118.1 switchState: Online switchMode: Native switchRole: Principal switchDomain: 1 switchId: ...
Post a Comment
Read more

High Availability Palo Alto (Active/Standby)

 High Availability is usually performed in most of the data centers networks today which ensures application availability . High Availability is usually achieved in case one of the appliance goes down or have some physical or logical connectivity issues.  Achieving high availability in Palo Alto firewall is relatively very easy. Palo Alto firewall can work in both Active/Standby mode or in Active/Active. We will basically be talking about Active/Standby mode in this article. There are basically two links that needs to be configure in Palo Alto for HA. 1. Control Links Control Links are associated with control plane traffic which is mainly used for heartbeat exchanged, configuration synchronization. Dedicate HA ports are available in higher series of Palo Alto or even a HA interface can be created for some inband ports.   2. Data Links Data Links are mainly used for session synchronization, forwarding table synchronization. Dedicated HSCI Ports are available for highe...
Post a Comment
Read more